Oli Exxon Mobil

Kami menjual Oli dan pelumas,MOBIL THREM 605, Oli DieselMobiltherm 600 Series  Mobil Industrial, United States View the  Mobiltherm 600 SeriesHeat transfer OilsProduct DescriptionMobiltherm heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended. Features and BenefitsMobiltherm oils are important members of the Mobil brand of specialty fluids that have gained a reputation for performance and reliability, even in severe applications. Modern refining techniques are a key factor in providing the excellent product features.Mobiltherm 600 Series offer the following benefits: FeaturesAdvantages and Potential BenefitsHigh resistance to thermal cracking and decompositionFree from sludge and coke deposits and minimum interference with heat transfer capability and minimized maintenance needsExcellent thermal propertiesHigh heat transfer rates and improved operating efficiency and lower operating costsGood thermal and oxidative stabilityLong trouble free service life and reduced downtimeGood low temperature fluidityEasy starting of cold systems  ApplicationsApplication Considerations: Mobiltherm heat transfer oils should not be mixed with other oils since this may impair the excellent thermal and oxidation stability resulting in a change in other properties, and complicate analyses aimed at determining useful oil life. If the oils are used above their recommended maximum temperatures, vapor lock may result unless the system is designed to operate at the higher temperature by pressurizing with an inert gas such as nitrogen. At higher temperatures, fluid life will be shortened because the rate of thermal degradation which increases markedly as temperatures rise above the recommended limit. In well-designed systems the temperature of the oil film surrounding the heating element should be about 15ºC to 30ºC above the bulk oil temperature. If higher than this, the service life of the oil may be shortened and sludge and coke may be deposited which would interfere with the heat transfer rates.As with other mineral oils, Mobiltherm heat transfer oils should be used only in systems with forced circulation. Systems that depend on convection for circulation of the heat transfer medium do not provide a rapid enough flow to prevent local overheating and rapid deterioration of the oil. Further, these oils are not recommended for use in open systems where hot oil is exposed directly to the air. If they spray or escape from leakage points, hot Mobiltherm oils may spontaneously ignite.Mobiltherm 600 series can be used in open and closed installations where the bulk oil temperature ranges are as outlined in the table below.Mobiltherm 603: Closed Systems (-15º C to 285º C), Open Systems (-15º C7 C to 150º C)Mobiltherm 605: Closed Systems (-12º C to 315º C), Open Systems (-12º C to 180º C)Mobiltherm 610: Open systems (-6°C to 250°C)Mobiltherm 611: Open systems (-6°C to 275°C) Typical Properties Mobiltherm 600 Series603605610611Viscosity, ASTM D 445    cSt @ 40ºC20.230.4113490cSt @ 100ºC4.25.411.531.5Pour Point, ºC, ASTM D 97-15-12-6-6Flash Point, ºC, ASTM D 92194230250294Specific Gravity @15 ºC kg/l, ASTM D 40520.8350.8570.880.906  Health and SafetyBased on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.The Mobil logotype, the Pegasus design and Mobiltherm are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.

Kami menjual oli dan pelumas,MOBIL ATF 220,Oli TransmisiMobil ATF 220  Mobil Passenger Vehicle Lube, United Kingdom Automatic Transmission FluidProduct DescriptionMobil ATF 220 is a high performance, fluid for automatic transmissions in older vehicles specifying Dexron IID. It is also used as a hydraulic fluid in unique applications. Features and BenefitsMobil ATF 220 is formulated from high-quality conventional base oils combined with a special additive system including viscosity index improvers, antioxidants, and defoaments providing smooth and controlled friction/wear characteristics. The product provides consumers an excellent driving experience even in broad range of driving conditions in a wide variety of pre-1994 automobiles. Key features and benefits include:FeaturesAdvantages and Potential BenefitsGood thermal and oxidation stabilityResists lacquer, sludge and deposit formation to keeps transmissions clean for efficient operation over the fill lifeGood anti-wear propertiesMeets the wear requirement to promote longer transmission lifeExcellent low-temperature fluidityAssist in improved start-up and clean fast lubrication at low ambient temperaturesEffective foam control propertiesSmooth and lasting shift feel and reduced fluid loss in severe service operating conditionsCompatible with all common seal materials used in Type IID transmissionsMaintains effective leakage control ApplicationsMobil ATF 220 is recommended for some automatic and manual transmissions in passenger cars and light trucks specifying Dexron IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. It is recommended that the user consult the manufacturer's requirements. Other applications include:Off-highway transmissions power steering and other hydraulic systems requiring a Dexron IID or Allison C-4 fluid.Industrial hydraulic systems and components. Specifications and ApprovalsMobil ATF 220 has the following builder approvals: MB-Approval 236.7 XMAN 339 TYPE V-1 XMAN 339 TYPE Z-1 XVOITH TURBO H55.6335.xx XZF TE-ML-04D/11A/14A X According to ExxonMobil, Mobil ATF 220 is of the following quality level: GM Dexron II XAllison C-4 XRenk Doromat XCaterpillar TO-2 XFord ESR-M2C163-A XGM Type A Suffix A XVolvo 97340 X Typical PropertiesMobil ATF 220 Viscosity, ASTM D 445 cSt @ 40°C37cSt @ 100°C7.0Brookfield Viscosity, ASTM D 2983 -cP @ -40°C33,000Viscosity Index, ASTM D 2270153Pour Point, °C, ASTM D 97-44Flash Point, °C, ASTM D 92200Density @15°C, kg/l, ASTM D 40520.870ColourRed Health and SafetyBased on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.The Mobil logotype, the Pegasus design and ATF 220 are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual olijual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli jual oli

OLI TURBINMobil DTE Oil LightMobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.Advantages and Potential Benefits:• Long service life reduces replacement costs, minimises downtime and increases productivity• Extended equipment service intervals reduces maintenance costs• Reduced pump cavitation and noisy, erratic operation• Improved operating efficiencyApplications:• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment• Continuous service in plain and roller bearings and parallel shaft gears• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means• Moderate severity hydraulic pumps• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

Oli DieselKami menjual Oli dan Pelumas MOBIL DELVAC MX 15W-40Mobil Delvac MX 15W­40 High Performance Diesel Engine Oil Product Description Mobil Delvac MX 15W­40 is a high performance diesel engine oil that helps extend engine life in the most severe on and off highway applications. The advanced chemistry of these products delivers exceptional performance in both modern, high­output engines including those with Exhaust Gas Recirculation (EGR), as well as older engines operating on either low or high sulfur fuels. As a result, Mobil Delvac MX 15W­40 meets or exceeds the API CI­4 PLUS service category and ACEA E7 industry specifications. Mobil Delvac MX 15W­40 is recommended by ExxonMobil for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, marine and agricultural industries. These products will provide outstanding protection in the most demanding diesel engines of Caterpillar, Cummins, Detroit Diesel, Mack, Mercedes Benz, Navistar, Volvo, and others. Mobil Delvac MX 15W­40 also meets or exceeds the API SL specification for gasoline engines and mixed fleets. The outstanding performance reserve of Mobil Delvac MX 15W­40 is the result of extensive cooperative development work with major Original Equipment Manufacturers (OEMs) and advanced additive chemistry with patented Trimer technology. These enhancements assure excellent control of oil thickening due to soot build­up and exposure to higher temperatures and provide outstanding resistance to oxidation, corrosion, wear, and high temperature deposits. Features and Benefits Modern high output diesel engines including those using EGR technology generate higher levels of soot and run at higher temperatures than older, naturally aspirated engines, which significantly increases the demands on engine lubricants. These engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher on the piston bringing the oil film closer to the combustion chamber where higher temperatures increase thermal stress on the lubricant. Higher fuel injector pressure and retarded timing improve exhaust emission control, but also increase engine temperatures and increase soot loads, including those engines operating with EGR. The key benefits include:Applications Recommended by ExxonMobil for use in: High performance diesel applications including pre­2007 turbo­charged, low emission engines designs, including those featuring EGR technology On highway applications operating in both high speed/high load and short haul pick­up/delivery Off highway applications operating in severe low speed/heavy load conditions Modern marine high­speed diesel engines, including Caterpillar, Cummins, Volvo, Daihatsu, and Yanmar. 12/11/12 Mobil Delvac MX 15W‑40 www.mobil.com/USA‑English/Lubes/PDS/NAUSENCVLMOMobil_Delvac_MX_15W‑40.aspx 2/3 High performance gasoline engines and mixed fleet operators Diesel­powered equipment from American and Japanese OEMs On highway heavy duty trucking and off highway including: construction, mining, quarrying, and agriculture Transmissions requiring Allison C­4 (SAE 15W­40 Grade)Typical Properties Mobil Delvac MX 15W­40 SAE Grade 15W­40 Viscosity, ASTM D 445 cSt @ 40ºC 123 cSt @ 100ºC 15.6 CCS, cP, ASTM D 5293 6000 @ ­20ºC MRV, cP, ASTM D 4684 29,000 @ ­25°C HTHS @ 150ºC, cP, ASTM D4683 4.3 Viscosity Index, ASTM D 2270 133 Sulfated Ash, wt%, ASTM D 874 1.3 Total Base #, mg KOH/g, ASTM D 2896 12 Pour Point, ºC, ASTM D 97 ­30 Flash Point, ºC, ASTM D 92 230 12/11/12 Mobil Delvac MX 15W‑40 www.mobil.com/USA‑English/Lubes/PDS/NAUSENCVLMOMobil_Delvac_MX_15W‑40.aspx 3/3 Flash Point, ºC, ASTM D 92 230 Density @ 15ºC kg/l, ASTM D 4052 0.879

Oli HidrolikKami menjual Oli dan Pelumas Exxon Nuto H 68Nuto H Series Premium Quality Anti-wear Hydraulic OilsProduct DescriptionExxon Nuto H Series oils are premium quality anti-wear hydraulic oils intended for industrial and mobile service applications where anti-wear lubricants are required. They are formulated with high quality base oils and a select additive system that results in products that provide many desirable features to improve and prolong equipment life. Nuto H Series oils are designed to provide good performance in a range of hydraulic components used in systems subjected to moderate to severe operating conditions. Their high level oxidation and chemical stability helps control deposit formation and reduces the potential for sluggish system operation and valve sticking. They provide long oil/filter life and optimum equipment protection reducing both maintenance and product disposal costs. They provide good protection against rust and corrosion in high humidity operations or where low levels of moisture are unavoidable. Nuto H Series oils separate water readily and have good air release properties. These products meet the performance requirements of a wide range of hydraulic system and component OEMs.Features and BenefitsThe Nuto H Series hydraulic oils help reduce the potential for wear and corrosion, particularly where water or moisture is present. Their excellent oxidation resistance and chemical stability allow extension of oil and filter change intervals. Their high level of anti-wear properties result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their good demulsibility characteristics permit the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.The Nuto H Series oils offer the following benefits:• Excellent anti-wear performance reducing pump wear and leading to long pump life • Reduction of sludge and deposit formation in close-tolerance components such as servo-valves • High performance and smooth hydraulic operations derived from fast air release, very good foam control and good water separability • Exceptional corrosion protection reduces the negative effects of moisture on system components • Excellent filterability to prevent filter blockage even in the presence of water • Effective oxidation and chemical stability characteristics allows extension of oil and filter lifeApplications •Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended • Hydraulic applications where contamination or leakage are unavoidable • Where small amounts of water are unavoidable and this water could damage components • Systems containing gears and bearings where mild anti-wear characteristics are required • Systems requiring load-carrying capability and anti-wear protection • Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist • Machines containing a wide range of components using various alloys in their designs  

Kami menjual Oli dan Pelumas Exxon Nuto H 32Nuto H SeriesPremium Quality Anti-wear Hydraulic OilsProduct DescriptionExxon Nuto H Series oils are premium quality anti-wear hydraulic oils intended for industrial and mobile service applications where anti-wear lubricants are required. They are formulated with high quality base oils and a select additive system that results in products that provide many desirable features to improve and prolong equipment life. Nuto H Series oils are designed to provide good performance in a range of hydraulic components used in systems subjected to moderate to severe operating conditions. Their high level oxidation and chemical stability helps control deposit formation and reduces the potential for sluggish system operation and valve sticking. They provide long oil/filter life and optimum equipment protection reducing both maintenance and product disposal costs. They provide good protection against rust and corrosion in high humidity operations or where low levels of moisture are unavoidable. Nuto H Series oils separate water readily and have good air release properties. These products meet the performance requirements of a wide range of hydraulic system and component OEMs.Features and BenefitsThe Nuto H Series hydraulic oils help reduce the potential for wear and corrosion, particularly where water or moisture is present. Their excellent oxidation resistance and chemical stability allow extension of oil and filter change intervals. Their high level of anti-wear properties result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their good demulsibility characteristics permit the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.The Nuto H Series oils offer the following benefits:• Excellent anti-wear performance reducing pump wear and leading to long pump life • Reduction of sludge and deposit formation in close-tolerance components such as servo-valves • High performance and smooth hydraulic operations derived from fast air release, very good foam control and good water separability • Exceptional corrosion protection reduces the negative effects of moisture on system components • Excellent filterability to prevent filter blockage even in the presence of water • Effective oxidation and chemical stability characteristics allows extension of oil and filter lifeApplications •Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended • Hydraulic applications where contamination or leakage are unavoidable • Where small amounts of water are unavoidable and this water could damage components • Systems containing gears and bearings where mild anti-wear characteristics are required • Systems requiring load-carrying capability and anti-wear protection • Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist • Machines containing a wide range of components using various alloys in their designs

Oli TurbinMobil DTE Oil Heavy MediumMobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.Advantages and Potential Benefits:• Long service life reduces replacement costs, minimises downtime and increases productivity• Extended equipment service intervals reduces maintenance costs• Reduced pump cavitation and noisy, erratic operation• Improved operating efficiencyApplications:• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment• Continuous service in plain and roller bearings and parallel shaft gears• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means• Moderate severity hydraulic pumps• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

Kami menjual Oli dan Pelumas Exxon Nuto H 46Nuto H SeriesPremium Quality Anti-wear Hydraulic Oils ProductDescriptionExxon Nuto H Series oils are premium quality anti-wear hydraulic oils intended for industrial and mobile service applications where anti-wear lubricants are required. They are formulated with high quality base oils and a select additive system that results in products that provide many desirable features to improve and prolong equipment life. Nuto H Series oils are designed to provide good performance in a range of hydraulic components used in systems subjected to moderate to severe operating conditions. Their high level oxidation and chemical stability helps control deposit formation and reduces the potential for sluggish system operation and valve sticking. They provide long oil/filter life and optimum equipment protection reducing both maintenance and product disposal costs. They provide good protection against rust and corrosion in high humidity operations or where low levels of moisture are unavoidable. Nuto H Series oils separate water readily and have good air release properties. These products meet the performance requirements of a wide range of hydraulic system and component OEMsFeatures and BenefitsThe Nuto H Series hydraulic oils help reduce the potential for wear and corrosion, particularly where water or moisture is present. Their excellent oxidation resistance and chemical stability allow extension of oil and filter change intervals. Their high level of anti-wear properties result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their good demulsibility characteristics permit the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.The Nuto H Series oils offer the following benefits:• Excellent anti-wear performance reducing pump wear and leading to long pump life • Reduction of sludge and deposit formation in close-tolerance components such as servo-valves • High performance and smooth hydraulic operations derived from fast air release, very good foam control and good water separability • Exceptional corrosion protection reduces the negative effects of moisture on system components • Excellent filterability to prevent filter blockage even in the presence of water • Effective oxidation and chemical stability characteristics allows extension of oil and filter lifeApplications •Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended • Hydraulic applications where contamination or leakage are unavoidable • Where small amounts of water are unavoidable and this water could damage components • Systems containing gears and bearings where mild anti-wear characteristics are required • Systems requiring load-carrying capability and anti-wear protection • Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist • Machines containing a wide range of components using various alloys in their designs 

Oli HidrolikMobil DTE 10 Excel 46Mobil DTE 10 Excel is a line of high performance anti-wear hydraulic oils designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems. Mobil DTE 10 Excel’s patent-pending formulation is constructed from carefully selected base oils and a proprietary additive system to provide well balanced performance in a range of applications. The products exhibit exceptional oxidation and thermal stability, allowing long oil life and minimising deposit formation in severe hydraulic systems using high pressure, high output pumps. The innovative cleaning properties protect critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems. The high shear stable viscosity index allows for a wide operating temperature range, maintaining maximum hydraulic efficiency and component protection at both low and high temperatures. Outstanding air release properties provide an added measure of protection in systems with low residence time. This helps prevent cavitations and microdieseling. The non-zinc anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimising deposit formation.Advantages and Potential Benefits:• Reduced formation of sludge and deposits for trouble-free operation and long filter life• Excellent protection over a wide temperature range• Long fluid life even under harsh operating conditions• Outstanding seal life reduces leakage, oil consumption and contamination ingress reduce maintenance costs• Lower energy consumption and higher system responsiveness• Prevention of aeration and cavitation damage in low residence time systemsApplications:• Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications• Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used• Systems requiring a high degree of load carrying capability and anti-wear protection

Kami menjual Oli dan Pelumas Mobil DTE,Mobil DTE Series  Product DescriptionThe Mobil DTE™  Oil Named Series of lubricants are premium performance circulating lubricants designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks and an additive system which provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and a high resistance to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good antiwear properties. They have a high viscosity index which ensures minimum variation of film thickness with temperature and minimum power loss during the warm up period. These grades have excellent air release properties which allow entrained air to separate, thus avoiding pump cavitation and erratic operation.Mobil DTE Oil Named are the lubricants of choice for many users because of their reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications. DTE Oil Named lubricants are used widely in steam turbines and hydroturbines with splash, bath and ring-oiling arrangements, and all other continuous circulation methods involving pumps, valves and ancillary equipment. This product series is recommended for continous service in the lubrication of plain and rolling bearings and parallel shaft gearing. They have also been used successfully in rotary air compressor applications and reciprocating natural gas compressors as well as vacuum pumps. Their reputation is based on many decades of successful service and satisfied users.Typical Properties Mobil DTE Named SeriesMobil DTE LightMobil DTE MediumMobil DTE Heavy MediumMobil DTE HeavyISO Viscosity Grade324668100Viscosity, ASTM D 445    cSt @ 40º C3144.565.195.1cSt @ 100º C5.56.98.710.9Viscosity Index, ASTM D 2270102989592Pour Point, ºC, ASTM D 97-18-15-15-15Flash Point, ºC, ASTM D 92218221223237Density @15º C kg/l, ASTM D 40520.850.860.870.88TOST, ASTM D 943, Hours to 2 NN5000370045004500Rust Prevention, ASTM D 665:    Distilled WaterPassPassPassPassSea WaterPassPassPassPassWater Seperability, ASTM D 1401,Min. to 3 ml emulsion @ 54ºC15152030Copper Strip Corrosion, ASTM D 130,3 hrs @ 121º C1B1B1B1BFoam Test, ASTM D 892, Seq I Tendency/stability, ml/ml20/050/050/050/0ApplicationsThe Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications where long lubricant service life is required. Specific applications include:Land-based and marine steam turbine, hydro turbine and some gas turbine circulation systems, including pumps, valves and other ancillary equipmentContinuous service in plain and roller bearings and parallel shaft gearingTurbines with oil supplied by splash, bath, ring oiling or other mechanical meansModerate severity hydraulic pumpsCompressors and vacuum pumps handling air, natural gas, and inert gases, and with discharge temperatures not exceeding 150 C